HOME CLIENTS CONTACT US FEEDBACK SITEMAP
 
 
 
 
 
 
 
 
 
 
     
 
  SERVICES  
  CAREER  
  REQUEST QUOTE  
Name
Email
Phone
Comments
 Enter Code Below
   
 
 
 
 
  + Features
  + Dimensions
  + Accessories
  -  GA Drawing
 GBW0001
 GBW0002
  + Installation, Operation and
     Maintenance Manual
Gate Valves Globe Valves Check Valves Ball Valves Cryogenic Valves Pressure Seal Valves
 
   
Oswal globe valves are heavy duty, outside screw & yoke type, bolted bonnet, rising stem and hand wheel. Valves are highly efficient for services requiring frequent operation and throttling. The internal passage within the valve diverts flow through 90º changes of direction resulting in pressure drop and turbulence. The most advanced design features provides the ultimate in dependable, economic flow control. They are available in wide range of sizes and weights. Globe valves are generally considered where moderate control or regulation of flow is required.

Globe valves are adequate for all service media. Valves are marked with flow direction since they are recommended to install with flow and pressure under the disc. It can also be installed in reverse condition depending upon the conditions. The globe valve is generally faster to operate due to less travel. But requires much force to operate compared to gate valves.

 
globe Valve, Globe Valve Manufactures,globe Valves,globe valve,globe valve manufacturers,globe valve supplier,industrial globe valves,'Valve Manifolds,3 valve Manifolds,5 valve Manifolds,Ball Valves,Inline Manufacturer and Exporters India
 
Size Range Class
2" - 16" Class 150
2" - 14" Class 300
2" - 14" Class 600
2" - 12" Class 900
2" - 12" Class 1500
   
Standards
Design Standard BS 1873
Testing Standard BS EN 12266 – 1
Face To Face ASME B 16.10
End Connection Flanged End - ASME B 16.5
  Butt Weld End – ASME B 16.25
Pressure – Temperature Chart ASME B 16.34
   
   Valve Operation  
Operator Size Range  
Handwheel 2” – 10” - Class 150, 300
  2” – 6 ” - Class 600
  2” – 4 ” - Class 900, 1500
Gear Operator 12” & Above - Class 150 & 300
  8” & Above - Class 600
  12” & Above - Class 900 & 1500
   
   Material
STRUCTURE End Connection Flanged End Raised Face, Butt Weld End, RTJ,. ETC
Operation Hand wheel, Gear Operator, Electrical Actuator, Pneumatic, Hydraulic
MATERIAL Shell WCB, WC1, WC6, WC9, LCB, LCC, LC3, C5, C12, CF8, CF8M, CF3, CF3M, CF8C, CN7M, CD4MCu, Hastelloy, Inconel, Duplex Stainless Steel
Trim 13% Cr Steel, 304 , 304L, 316, 316L, 321, 347, F51, Monel
 
     
 
SERVICES | CAREER | REQUEST QUOTE | CONTACT | FEEDBACK | SITEMAP
 
  copy right @ 2007 all right reserved Oswal Industries Ltd.